Rear Panel - ION Vinyl Motion Air Guia De Inicio Rapido

8. Volume/Power Knob: To power on Vinyl Motion Air, turn this knob clockwise until it clicks. When
powered on, use this knob to adjust the volume for the internal speakers and headphones. To turn off
Vinyl Motion Air, turn this knob counterclockwise until it clicks.
9. Headphone Output: Connect headphones here (sold separately) to listen to your vinyl.
10. Battery Charging Indicator: The LED will illuminate when charging the battery. The LED will turn off
once the battery is fully charged.
11. Power Indicator: This LED illuminates when the power is on and goes out when the battery power is
depleted.
12. Speaker: The record's audio will be played through this built-in speaker.
13. Aux Input: Connect a CD player, digital media player, or other audio source to this 1/8" stereo
auxiliary input.
14. Bluetooth Button: Press this button to start Bluetooth pairing. If after 5 minutes no Bluetooth speaker
can be found to pair with, the Bluetooth transmitter will become inactive and the LED will turn off. If
currently connected, press this to disconnect from a currently connected Bluetooth device.
15. Bluetooth LED: This LED blinks when pairing with a Bluetooth device. Once fully paired, the LED will
remain solid. The LED will be off when Bluetooth is inactive, and when the Vinyl Motion Air is turned
off.
16. Bluetooth Volume: Use this knob to adjust the volume for the Bluetooth source.

Rear Panel

1. RCA Output*: The audio from a playing vinyl record is
sent to this line-level coaxial audio output. This must not
be connected to phono level devices.
2. USB Port: Use the included USB cable to connect your
turntable to your computer. The USB connection will send
audio from the turntable to your computer. Please see the
Using Vinyl Motion Air With Your Computer section of
this manual for information. Also, use the included USB
cable to connect Vinyl Motion Air to a USB power adapter
connected to a power outlet or your computer.
Pairing Vinyl Motion Air to a Bluetooth Speaker
Vinyl Motion Air has a Bluetooth transmitter to send audio to a Bluetooth speaker (or Bluetooth headphones)
wirelessly.
1. Power on your Bluetooth speaker and ensure it is in pairing mode.
2. Power on the Vinyl Motion Air turntable.
3. Press and release the Bluetooth button on Vinyl Motion Air to start pairing to your Bluetooth device.
Once Vinyl Motion Air is connected to the Bluetooth speaker, the Bluetooth LED will be solid blue.
Your Bluetooth speaker should also indicate that it's paired.
Note: Vinyl Motion Air will connect to the closest Bluetooth speaker that is near it. If after 5 minutes no
Bluetooth speaker can be found to pair with, the Bluetooth transmitter will become inactive and the
LED will turn off.
Note: Maximum range will be achieved when using devices with Bluetooth 4.0 or higher.
4. Play music on your Vinyl Motion Air turntable. If you are connected to a Bluetooth speaker with a
play/pause button, and do not hear audio, try pressing the play/pause button.
5. Adjust the volume on your Bluetooth speaker (if applicable) or the Bluetooth Volume knob on Vinyl
Motion Air to control the output level.
6. To disconnect pairing, power off the Vinyl Motion Air turntable or turn of Bluetooth pairing on your
Bluetooth speaker.
Note: Move other Bluetooth receivers/speakers out of range of Vinyl Motion Air (30'/9.1m or more) or turn
them off to connect to your Bluetooth speaker.
6
2
1
R
L
USB
OUT