Vornado PCO300 Manual Del Usuario página 24

Troubleshooting
Problem
Control Panel is not
responding.
UV Bulb is not illuminating
24 English
Possible Cause and Solution
Control Lock may be enabled. If Control Lock (
The Control Panel is Touch Sensitive. Be sure to make solid contact when pressing the Control Panel. The
Control Panel may not recognize quick taps or partial contact.
Check to ensure the UV Bulb Tray is properly installed. Remove Tray and re-insert Tray into unit.
Replace with a new UV Bulb. If UV Bulb does not illuminate after proper installation or new UV Bulb replace-
ment, contact Consumer Service for assistance.
) is illuminated, press the Control Lock ( ) to unlock.