Lanberg SM01-WS01 Manual De Instrucciones página 14

G. Pairing with TuyaSmart App
• Powering and pairing the device
1. Take the product out of the packaging.
2. Remove the cover of the main module and pull out insulation sheet.
3. The device should start up immediately in pairing mode.
• Adding new devices
1. Press the "+" symbol in the upper
right corner of the application.
3. Important note: Adding a new
device will only be possible if the
smartphone has Wi-Fi connection
enabled and is connected to the
network to which you want to
connect the Smart Lanberg device.
2. Next, select the "Water Leak Sensor
(WIFI)" from the "Security&Sensor"
category, alternatively you can use
the "Auto Scan" function at the top
of the window.
EN