tomado TWK1701B Instrucciones De Uso página 13

Caution: never switch on the kettle when it contains no water. If, by accident, the kettle is switched on without water in it,
the boil dry safeguard switches off the kettle automatically. In this case, remove the kettle from the connection base and
allow it to cool down for a few minutes. Then you can fill the kettle with water and switch it on again. Check that the lid of
the kettle is properly closed. If not, the kettle does not switch off automatically when the water boils and continues to boil.
The kettle switches off automatically when the water boils. The indicator led switches off. If you want to boil the water once
more, wait approx. 30 seconds before switching it on again to allow the switch to cool down. It is also possible to switch off
the kettle at any time by means of the on/off switch. When the kettle is taken off the connection base while boiling, it will
also switch off. When placing back the kettle on the connection base, wait approx. 30 seconds before switching it on again
to allow the switch to cool down.
Caution! It is possible that a little condensed water remains on the edge of the connection base. This is normal and does not
affect the function of the kettle.
Scale may occur on the inside of the kettle. If you have hard water, it may be necessary to de-scale the kettle occasionally.
Use a suitable de-scaling agent for kettles/coffee machines and observe the accompanying instructions.
You can also de-scale the kettle with lemon juice. The lemon acid in this juice will make sure that the scale is removed.
This natural method prevents the use of chemicals. Fill half the kettle with hot water. Add the juice of half a lemon.
Boil the water and then allow the water to cool down for 30 minutes. Throw away the boiled water and rinse the kettle
once more. Never clean the appliance with cleaning agents. These could damage your kettle.
In order to remove the anti-scale filter from the kettle for cleaning, you must take the kettle from the connection base and allow
it to cool down. Do not remove the anti-scale filter from the kettle if it is still hot or filled with water. Pull the anti-scale filter
loose towards the rear, away from the spout, and clean it with hot water. When placing back the filter, make sure it is properly
attached to the spout. First place the point of the anti-scale filter and then you can press tight the anti-scale filter at the top
by means of the clamp. Never place the anti-scale filter loose in the kettle.
Regularly clean the kettle for optimum performance. Never submerge the kettle and connection base in water and/or other
liquids. Before cleaning, always remove the plug from the socket and allow the kettle to cool down. Regularly wipe the
outside with a moist cloth. Never use detergents or abrasive cleaning agents!
This symbol means that this product should not be disposed of with regular household waste (2012/19/EU).
Observe the applicable rules in your country for the separate collection of electric and electronic products.
By disposing of the product correctly, you prevent negative consequences for the environment and for public health.
The packaging material of this product can be recycled 100%, return packaging material separately.
SWITCHING OFF THE KETTLE
DE-SCALING
CLEANING AND MAINTENANCE
RECYCLING
EN - 13