Publicidad
Idiomas disponibles
Idiomas disponibles
How to connect:
1. Connect the NeuLog ECG sensor to a smart device
using
one
Mac/Tablet/Viewer).
2. Wet the red clip and place it on the subject's left wrist
with the metal connector on the underside (palm
side) of the arm.
3. Wet the yellow clip and place it on the subject's right
wrist with the metal connector on the underside
(palm side) of the arm.
4. Wet the black clip and place it on the subject's left
leg or forearm or elbow.
5. Connect the three alligator clips (red, yellow, black)
directly to their corresponding arm clip's (red, yellow,
black) metal piece that forms a loop.
6. You are now connected.
Note: There are other configurations possible, this is just
one. If the R wave shows a downward slope instead of
upward, your connection's polarization is reversed
though the absolute results are still the same.
V2018.01
22
of
the
following
Home
guides
(PC
English
or
Publicidad
