Settings; General Settings; Touch Panel Adjust; Sound Settings - Sony XAV-65 Manual De Instrucciones

Ocultar thumbs Ver también para XAV-65:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Settings

Select [Settings] in the HOME menu when you need
to change the settings of the unit.
"" in the table below indicates the default setting.
1
Press HOME, then touch [Settings].
2
Touch one of the setup category icons.
: General Settings (page 12)
: Sound Settings (page 13)
: Screen Settings (page 13)
: Visual Settings (page 14)
3
Move the scrollbar up and down to
select the desired item.
To return to the previous display, touch
To switch from the HOME screen to the playback
screen, touch
.

General Settings

Language
Unit status: Any status
Option
Purpose
English (),
To select the display language.
Español,
Русский
Time Format
Unit status: Any status
Option
Purpose
12-hour (),
To change the time format.
24-hour
Clock Time
Unit status: Any status
Option
Purpose
OFF (), ON
To activate the CT function.
Clock Adjust
Unit status: Any status
Option
Purpose
To set the clock.
(Available only when [Clock
Time] is set to [OFF].)
12
GB
Beep
Unit status: Any status
Option
OFF, ON ()
Dimmer
Unit status: Any status
Option
OFF
Auto ()
.
ON
Dimmer Level
Unit status: Any status
Option
(–5 - +5)
: 0

Touch Panel Adjust

Unit status: Any status
Option
Output Color System
Unit status: No source selected
Option
NTSC (), PAL
Camera Input
Unit status: Any status
Option
OFF
Normal ()
Reverse
Purpose
To activate the operation sound.
Purpose
To deactivate the dimmer.
To dim the display automatically
when you turn lights on.
(Available only when the
illumination control lead is
connected.)
To dim the display.
Purpose
To select the brightness level
when the dimmer is activated.
Purpose
To adjust the touch panel
calibration if the touching
position does not correspond
with the proper item.
Purpose
To change the color system
according to the connected
monitor. (SECAM is not
supported.)
Purpose
To deactivate the input.
To display the picture from the
rear view camera.
To flip the picture from the rear
view camera horizontally.

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido