Chauvet DJ SlimPAR PRO H USB Guía De Referencia Rápida página 5

SlimPAR PRO H USB QRG
D-Fi USB
Connectivity
DMX Linking
Starting
Address
Master/Slave
Connection
IRC-6 Infrared
Remote
Control
The SlimPAR PRO H USB is able to become a D-Fi wireless
receiver/transmitter with the use of the D-Fi USB from CHAUVET DJ.
Simply set the DIP switch D-Fi receiving/transmitting channel, plug it into
the USB port, then set the product's DMX personality and starting DMX
address. Further instructions for connecting and configuring this product for
D-Fi USB operation are in the User Manual.
WARNING! DO NOT plug anything other than a D-Fi USB into the
USB port. Doing so may cause damage to the product.
Once plugged in, the D-Fi USB will take over the product. Wired DMX,
manual display control/menu buttons and IRC-6 will be unavailable
until you unplug the D-Fi USB. The priority levels are:
1. D-Fi USB
2. Wired DMX
3. IRC-6 Remote Control
4. Manual Digital Display/Menu Buttons
The SlimPAR PRO H USB can work with a DMX controller when linked by
DMX serial connections. Instructions for connecting and configuring this
product for DMX operation are in the User Manual. If you are not familiar
with DMX, download the DMX Primer from www.chauvetlighting.com.
To ensure full access to all channels in each DMX mode, the highest
recommended DMX address is 501.
The SlimPAR PRO H USB uses the DMX data connection for its
Master/Slave mode. Instructions for connecting and configuring this product
for Master/Slave operation are in the User Manual.
The SlimPAR PRO H USB is compatible with the IRC-6 infrared remote
control from CHAUVET DJ. For more information on the IRC-6 or to
download instructions, go to www.chauvetlighting.com.
5
EN