DeWalt DW685 Traducido De Las Instrucciones Originales página 27

• Blades made of high alloy, high-speed steel
(HSS steel) should not be used. Best results are
achieved using carbide-tipped or CrV blades.
• Only sharp blades in perfect working order
should be used; cracked or bent blades should
be discarded and replaced at once.
• Ensure that the blade is securely fixed and
rotates in the correct direction.
• Kickback occurs when the tool begins to stall
rapidly and is driven back towards the operator.
Release the switch immediately if the blade
sticks or the tool stalls.
• Keep the blades sharp.
• Support large panels near the cutting area.
• Do not remove the tool from the workpiece
while making a cut with the blade rotating.
Release the on/off switch and wait for the blade
to come to a halt.
Residual Risks
In spite of the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks cannot be avoided.
These are:
– Impairment of hearing .
– Risk of personal injury due to flying particles.
– Risk of burns due to accessories becoming hot
during operation.
– Risk of personal injury due to prolonged use.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Blade diameter.
DATE CODE POSITION (FIG. 1a)
The Date Code (t), which also includes the year of
manufacture, is printed into the housing.
Example:
2010 XX XX
Year of Manufacture
Package Contents
The package contains:
1 Biscuit jointer groover
1 Mitre fence
1 Side handle
1 Cutting insert
1 Sickle spanner 34/36
1 Pin spanner 25
1 Dust extraction adapter
(including 2 bolts and 2 wing nuts)
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. 1a, 1b)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
a. On/Off switch
b. Depth of cut adjuster
c. Cover plate
d. Knurled nuts
e. Fine adjuster
f. Star knob
g. Front grip
h. Dust extraction outlet
i. Parallel fence
j. Viewing opening
k. End marks
l. Locking bolts for parallel fence
INTENDED USE
Your D WALT biscuit jointer groover has been
E
designed for making flat-dowel joints as well as
for parallel scribing and trimming in wood, wood
products and plastics.
DO NOT use under wet conditions or in presence of
flammable liquids or gases.
The biscuit jointer groover is a professional power
tool.
DO NOT let children come into contact with the
tool. Supervision is required when inexperienced
operators use this tool.
EN G LI SH
25