Care And Cleaning - GE PEM31 Manual Del Propietário

Care and cleaning of the microwave oven.
Sensor Cooking
Popcorn Beverage Potato
Vegetable Reheat Defrost
Weight/Time
Express Cook
1 2 3 Add
30 Sec
4 5 6 On/Off Timer
Cook
7 8 9 Time
Power Set
Level 0 Clock Turntable
Cancel Start
Off Pause
Sensor Cooking
Beverage Potato
Popcorn
Defrost
Vegetable Reheat Weight/Time
Express Cook
1 2 3 Add
30 Sec
4 5 6 Timer
On/Off
7 8 9 Cook
Time
Power 0 Set
Level Clock Turntable
Clock Display
Cancel Start
Off Pause
Helpful Hints
An occasional thorough wiping with a solution of baking soda and water keeps the
inside fresh.
Unplug the cord before cleaning any part of this oven.
How to Clean the Inside
Walls, Floor, Inside Window, Metal and Plastic Parts on the Door
Some spatters can be removed with a paper towel; others may require a damp cloth. Remove
greasy spatters with a sudsy cloth, then rinse with a damp cloth. Do not use
abrasive cleaners or sharp utensils on oven walls.
To clean the surface of the door and the surface of the oven that come together upon
closing, use only mild, nonabrasive soaps or detergents using a sponge or soft cloth. Rinse
with a damp cloth and dry.
Never use a commercial oven cleaner on any part of your microwave.
Removable Turntable and Turntable Support
in warm, sudsy water or in the dishwasher. The turntable and support can be broken if dropped.
Remember, do not operate the oven without the turntable and
support in place.
How to Clean the Outside
Do not use cleaners containing ammonia or alcohol on the microwave oven. Ammonia or
alcohol can damage the appearance of the microwave.
Case
Clean the outside of the microwave with a sudsy cloth. Rinse with a damp cloth and then dry. Wipe
the window clean with a damp cloth.
Control Panel and Door
Wipe with a damp cloth. Dry thoroughly. Do not use cleaning sprays, large amounts of soap and
scratch the control panel.
Door Surface
It is important to keep the area clean where the door seals against the microwave. Use only mild,
non-abrasive detergents applied with a clean sponge or soft cloth. Rinse well.
Power Cord
If the cord becomes soiled, unplug and wash with a damp cloth. For stubborn spots, sudsy water
may be used, but be certain to rinse with a damp cloth and dry thoroughly before plugging cord
into outlet.
Stainless Steel (on some models)
Do not use a steel-wood pad; it will scratch the surface.
To clean the stainless steel surface, use a hot, damp cloth with a mild detergent suitable
for stainless steel surfaces. Use a clean, hot, damp cloth to remove soap. Dry with a dry, clean cloth.
Always scrub lightly in the direction of the grain.
GEAppliances.com
25