Fitting And Removing The Wheels; Folding And Unfolding; Pro-Fix System; Fitting And Removing The Hammock - JANE CROSSWALK Manual Del Usuario

1.- FITTING AND REMOVING THE WHEELS

Before using the CROSSWALK pushchair for the first time it is
necessary to fit the rear wheels.
To fit the wheels press the button on the middle of the wheel
and insert the axle into the rear wheel bearer and push until
it slots firmly into place.
press the central button and take the wheel off.
To fit the front wheels, slot the upper axle into the lower part
of the nose until it clicks into place.
If you need to detach them, press the button inside the nose
and remove take the wheel off.

2.- FOLDING AND UNFOLDING

To unfold your CROSSWALK, hold the handlebar with one
hand while you press the locking pedal at the bottom on the
3
right. Pull the handlebar and unfold until it clicks and
4
locks into place.
To fold your CROSSWALK turn the lever on the top of the
hammock and set it to the folding position.
P1: if the hammock is positioned facing forwards.
P2: if the hammock is positioned facing backwards. (see AD-
JUSTING THE ANGLE OF THE SEAT). Then pull the two slide
catches on the sides and push the handlebar forwards un-
til the pushchair is completely folded. Adjust the footrest if
necessary. 6 - 7
When folding the pushchair it is useful to place the hammock
26 facing forwards as this makes it fold up more compactly.
1a If you need to remove the wheels,
1b
2
5
WARNING: You must make sure that the child is kept away from
the pushchair while it is being folded or unfolded. During the-
se operations the appearance of sharp points and compression
areas are inevitable.

3.- PRO-FIX SYSTEM

The chassis of your pushchair is fitted with the PRO-FIX sys-
tem, making it ready for the following baby carriers and child
Restraint Systems to be attached: Nano, Transporter, Matrix
8-8a
Light and Koos. The PRO-FIX system makes it easier to
attach and remove these accessories to and from the chas-
sis, securing them to the chassis in a quick, simple and safe
way. To do this follow the instructions for these accessories
carefully.
WARNING: It is necessary to remove the hammock from the
pushchair to attach any of the auto accessories.

4.- FITTING AND REMOVING THE HAMMOCK

Your CROSSWALK is fitted with the pro-fix system. With this
system, the CROSSWALK hammock can be attached perfectly
to the chassis. What's more, the hammock is reversible so it
can be positioned facing you or facing forwards.
the hammock off, simultaneously pull the unlocking levers
situated on both sides of the hammock.
8-8a To take
9