FILTER PUMP
OWNER'S MANUAL
WARNING
IMPORTANT SAFETY INSTRUCTIONS
TO THE STORE
READ AND FOLLOW ALL INSTRUCTIONS
QUESTIONS? PROBLEMS?
MISSING PARTS?
WARNING - RISK OF ELECTRIC SHOCK -
For FAQ, Manuals, Videos Or
Spare Parts, Please Visit
The pump is to be supplied by an isolating
bestwaycorp.com/support
transformer or supplied through a residual
current device (RCD) having a rated residual operating current not
exceeding 30 mA.
The plug of pump shall be at least 3.50m away from the pool.
The appliance must be supplied by earthed power source.
Extension cords can't be used.
WARNING - RISK OF ELECTRIC SHOCK - The pump cannot be using
while people are inside the pool. Forbid the access of the pool in case of
damage of the filter pump.
DO NOT BURY CORD. Locate cord to minimize abuse from lawn mowers,
hedge trimmers, and other equipment.
WARNING - The supply cord cannot be replaced. If the cord is
damaged the appliance should be scrapped.
CAUTION - This pump is for use with storable pools only. Do not use
with permanently-installed pools. A storable pool is constructed so that it
is capable of being readily disassembled for storage and reassembled to
its original integrity. A permanently-installed pool is constructed in or on
the ground or in a building such that it cannot be readily disassembled
for storage.
IMPORTANT - Using the pump with an unmatched electrical supply is
dangerous and will result in catastrophic failure of pump.
RISK OF ELECTRICAL SHOCK - When working with electricity, turn the
electrical power off at the circuit breaker and lock breaker door. Failure to
do so will result in increased risk of shock, injury and possibly death.
DO NOT REMOVE THE GROUNDING PRONG OR MODIFY THE
PLUG IN ANY WAY. DO NOT USE ADAPTOR PLUGS. Consult a
qualified electrician for any questions related to the validity of your plugs
grounding.
Handle the pump with care. Do not pull or carry the pump by the power
cord. Never pull a plug from the outlet by yanking the power cord. Keep
cord free from abrasions. Sharp objects, oil, moving parts, and heat
should never be exposed to the filter pump.
3