Top Panel; Front Panel - TECshow CRIOMIX GO Manual De Usuario

Top Panel

1. CHANNEL gAIN
Adjusts the corresponding channel's pre-fader and pre-EQ
gain level.
2. CHANNEL TREBLE
Adjusts the high (treble) frequencies of the audio on the cor-
responding channel.
3. CHANNEL LoW
Adjusts the low frequencies of the audio on the correspond-
ing channel.
4. mIC VoL
Adjusts the audio level of the microphone signal.
5. x-FADER
Blends audio playing between Channels 1 and 2. Sliding this
to the left plays channel 1 and sliding to the right plays Chan-
nel 2.
6. HEADPHoNE VoL
Adjusts the level of the headphone audio.
7. mASTER VoL
This control adjusts the output volume of the Program mix.
8. PoWER LED
Indicate the unit power on.

Front Panel

9. mIC INPUT
Connect 1⁄ 4 " microphones to this input. The microphone
controls are located on the top panel.
10. HEADPHoNES
Connect your 1⁄ 4 " headphones to this output for cueing
CRIomIx go
ENGLISH VERSION
p. 5