D-Link DSL-2730E Guía De Instalación Rápida página 4

Ocultar thumbs Ver también para DSL-2730E:

Idiomas disponibles

TROUBLESHOOTING

SETUP AND CONFIGURATION PROBLEMS

SET-UP AND CONFIGURATION PROBLEMS

1. HOW DO I CONFIGURE MY DSL-2730E ROUTER WITHOUT THE CD, OR CHECK MY

WIRELESS NETWORK NAME (SSID) AND WIRELESS ENCRYPTION KEY?

- connect your pc to the router using an ethernet cable.

- Open a web browser and enter the address http://192.168.1.1

- the default username is admin. the default password is admin.

- If you have changed the password and can not remember it, you will need to reset the router to

set the password back to admin.

2. HOW DO I RESET MY DSL-2730E ROUTER TO FACTORY DEFAULT SETTINGS?

- ensure the router is powered on.

- press and hold the reset button on the rear of the device for 10 seconds.

note: Resetting the router to factory default will erase the current configuration settings. to re-

configure your settings, log into the router as outlined in question 1, then run the setup Wizard.

3. WHY CAN I NOT GET AN INTERNET CONNECTION?

- For adsl users please contact your Isp to make sure the service has been enabled/connected

by your Isp and that your Isp username and password is correct.

DSL-2730E