Care & Cleaning Instructions; Wash & Rinse Jar - CHEF-BUILT CCB-2000 Manual De Instrucciones

Licuadora de 1.25 hp
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CARE & CLEANING INSTRUCTIONS
1.
Before cleaning, always check to make sure the ON/OFF (I/O) switch on the side
of the motor base is in the OFF (O) position. Unplug Power Blender from the
electric outlet.
Empty the food content from the jar as much as possible.
2.
Wash, rinse, sanitize and dry the jar after every use, following the detailed
procedures described below under wash & rinse jar and sanitize & air dry jar.
3.
Wash, rinse, sanitize and dry the jar after any 1-hour period of non-use.
4.
Clean and sanitize the motor base after every use.
WARNING: DO NOT IMMERSE MOTOR BASE IN WASHING SOLUTION,
RINSE WATER OR SANITIZING SOLUTION.
5.
Washing solutions based on non-sudsing detergents and chlorine-based
sanitizing solutions having a minimum chlorine concentration of 100 PPM are
recommended.
The following wash and rinse solutions, or their equivalents, may be used.
Wash: Diversey
gallon, Hot: 115˚F (46˚C)
Rinse: Plain Water, Warm: 95˚F (35˚C)
6.
Repetitive batch-processing applications: Frequent cleaning of the jar will
prolong the life of the blade assembly.
IMPORTANT: The jar should be cleaned after every 30 minutes of blending.
7.
Do not use jar to store processed foods or beverages.
WASH & RINSE JAR
1.
Always check to make sure the ON/OFF (I/O) switch on the side of the motor base
is in the OFF (O) position. Unplug from the electric outlet.
2.
Remove jar from the motor base.
3.
Remove lid. Empty the food content from the jar as much as possible.
4.
Rinse jar interior, lid and lid cap under running water. Add washing solution to
jar. Scrub and flush out the jar interior, lid and lid cap to dislodge and remove as
much food residue as possible. Empty jar.
5.
Wipe down exterior of jar with a soft cloth or sponge dampened with washing
solution. Wash lid and lid insert in fresh washing solution.
6.
Fill jar 1/4 full with fresh washing solution. Cover with lid and place on motor base.
Blend on HIGH speed for 2 minutes. Empty jar.
7.
Repeat steps #4 and #5, using clean rinse water in place of washing solution.
8.
CAUTION: TO MINIMIZE THE POSSIBILITY OF SCALDING, TEMPERATURE OF
WASHING SOLUTION AND RINSE WATER MUST NOT EXCEED 115˚F (46˚C),
AND QUANTITY USED MUST NOT EXCEED 1/4 JAR FULL.
SO-315234_18062 Chef-Built_Bar Blender 48oz CCB-2000_Sensio_IM_R6.indd 7
Wyandotte: Diversol
®
7
BX/A or CX/A - 4 tablespoons/
®
2018-08-10 3:36 PM

Publicidad

Tabla de contenido
loading

Tabla de contenido