General Safety Information; Specific Safety Rules - Matco Tools MUC122LED Instrucciones De Operación

FAILURE TO OBSERVE THESE WARNINGS COULD RE SULT IN IN JU RY.
SAVE THESE INSTRUCTIONS!

GENERAL SAFETY INFORMATION

(FOR ALL BATTERY OPERATED LIGHTS)
WARNING:
Read and understand all instructions. Failure to
follow all instructions listed below, may result
in electric shock, fire, explosion and/or serious
personal injury.
Work Area Safety
1 . Keep your work area clean and well lit .
Cluttered benches and dark areas invite accidents .
2 . Do not operate lights in explosive atmospheres, such as in
the presence of flammable liquids, gases, or dust . Lights
create sparks which may ignite the dust or fumes .
3 . Keep bystanders, children, and visitors away while operating
a light . Distractions can cause you to lose control and
endanger others .
Electrical Safety
4 . A battery operated light with integral batteries or a separate
battery pack must be recharged only with the specified
charger for the battery . A charger that may be suitable for
one type of battery may create a risk of fire when used with
another battery .
5 . Use battery operated light only with specifically designated
battery pack . Use of any other batteries may create a risk
of fire .
Personal Safety
6 . Stay alert, watch what you are doing, and use common sense
when operating a light . Do not use light while tired or under
the influence of drugs, alcohol, or medication .
A moment of inattention while operating lights may
result in serious personal injury .
7 . Dress properly . Do not wear loose clothing or jewelry .
Contain long hair . Keep your hair, clothing, and gloves away
from moving parts . Loose clothes, jewelry, or long hair can be
caught in moving parts .
8 . Avoid accidental starting . Be sure switch is in the locked or
"off" position before inserting battery pack . Carrying lights
with your finger on the switch or inserting the battery pack
into a light with the switch "on" invites accidents .
9 . Do not overreach . Keep proper footing and balance at all
times . Proper footing and balance enable better control of
the light in unexpected situations .
10 . Use safety equipment . Always wear eye protection .
Dust mask, non-skid safety shoes, hard hat, or hearing
protection must be used for appropriate conditions .
MUC122LED
MUC122LED 12V LITHIUM-ION LED FLASHLIGHT
WARNING
Light Use and Care
11 . Use clamps or another practical way to secure and support
the workpiece to a stable platform . Holding the work by hand
or against your body is unstable and may lead to loss of
control .
12 . Disconnect battery pack from light or place the switch in the
locked or "off" position before making any adjustments,
changing accessories, or storing the light . Such preventive
safety measures reduce the risk of starting the light
accidentally .
13 . Store idle lights out of reach of children and other untrained
persons . Lights are dangerous in the hands of untrained
users .
14 . When battery pack is not in use, keep it away from other
metal objects like: paper clips, coins, keys, nails, screws,
or other small metal objects that can make a connection
from one terminal to another . Shorting the battery terminals
together may cause sparks, burns, or a fire .
15 . If damaged, have the light serviced before using . Many
accidents are caused by poorly maintained lights .
16 . Use only accessories that are recommended by the
manufacturer for your model . Accessories that may be
suitable for one light may create a risk of injury when used
on another light .
Service
17 . Light service must be performed only by the MATCO
authorized service centers listed . Service or maintenance
performed by unqualified personnel may result in a risk of
injury . Repair by unqualified personnel, use of unauthorized
parts, and failure to follow maintenance instructions may
create a risk of shock or injury .
SAVE THESE INSTRUCTIONS!

SPECIFIC SAFETY RULES

DO NOT let comfort or familiarity with product
replace strict adherence to cordless product
safety rules. If you use this light unsafely or
incorrectly, you can suffer serious personal injury.
1 . Hold light by insulated gripping surfaces when performing an
operation avoiding contact with hidden wiring . Contact with
a "live" wire will also make exposed metal parts of the light
"live" and shock the operator .
2 . Be aware that this light is always in operating condition,
because it does not have to be plugged into an electrical
outlet .
3 . Always be sure you have firm footing .
4 . Be sure no one is below when using the light in high
locations .
5 . Some material contains chemicals which may be toxic . Take
caution to prevent working dust inhalation and skin contact .
Follow material supplier safety data .
2 rev. 12/27/12