Descargar Imprimir esta página

Dimensions For Installation / Medidas Para La Instalación - Helvex ARGOS UTV-296 Guia De Instalacion

Publicidad

Dimensions for Installation / Medidas para la Instalación
Drill the marble slabs according to the shown dimensions.
1
placas de mármol barrene de acuerdo a las medidas mostradas.
*1,5"
(
4 cm
)
sink
lavabo
*Recommended Dimensions
/ Espesor máximo de placa de 3,1cm.
* Medidas Recomendadas
Place the electronic module (included), mark and drill. /
3
el módulo electrónico (incluido), marque y barrene.
Unscrew the nut, remove the washer and
5
the tapered gasket from the stud.
Desenrosque la tuerca, retire la rondana
y el empaque cónico del espárrago.
stud
espárrago
tapered gasket
empaque cónico
nut
tuerca
Ø drill
1 ¼" max.
Ø barreno
(3,2 cm max.)
Maximum slab thickness of 1,25"
elecronic module
(included)
módulo electrónico
(incluido)
Insert the faucet in to the sink and verify
6
/
that the gasket is placed.
salida en el lavabo y verifique que se
coloque el empaque.
washer
rondana
/
Para
Install the electronic module according to the reference
2
dimensions shown.
las medidas referenciales que se muestran.
*Recommended Dimensions
* Medidas Recomendadas
Finished Floor Level
Nivel de Piso Terminado
Note: Place the electronic module where water does not splash.
módulo electrónico donde no le salpique el agua.
Insert the anchors (included) and screw the lag screws (included).
Presente
4
/
Inserte los taquetes (incluídos) y enrosque las pijas (incluídas).
/ Inserte la
gasket
empaque
/ Instale el módulo electrónico de acuerdo a
*19,7"
(
50 cm
)
*11,4"
(29 cm)
anchor
taquete
lag screw
pija
Fix the faucet by tightening the nut firmly
7
with the hexagonal wrench (included).
Fije la salida apretando firmemente la
tuerca con la llave hexagonal (incluida).
tuerca
*25,2"
(64 cm)
/ Nota: Coloque el
/
tapered gasket
empaque cónico
washer
/ rondana
nut
hexagonal wrench
(included)
llave hexagonal
(incluída)
2

Publicidad

loading