Steren CCTV-220 Manual De Instrucciones página 7

set as "NULL String" (This default setting will let the Wireless
Internet Camera connect to ANY access point on the
infrastructure network). The IP address will also return to the
default setting as 192.168.0.20.
4. DC Power Connector
The DC power input connector is located on the Wireless
Internet Camera's rear panel, and is labeled DC5V with a single
jack socket to supply power to the Wireless Internet Camera.
Power will be generated when the power supply is connected to
a wall outlet.
Top/Bottom Panel
Screw Hole
Located on the top/bottom panel of the camera, the screw hole is
used to connect the camera stand onto the camera by attaching
the screw head on the camera stand into the screw hole of the
camera.
ENGLISH-7