Cleaning And Care - Klarstein Metrobreeze 9 New York City Manual De Instrucciones

EN
26

CLEANING AND CARE

The product has an automatic water evaporation system. The circulation of condensed
water cools the condenser. This not only increase refrigeration efficiency but save
energy.
Discharging the Water Container
If the machine's water container is full, the display screen will present "FL" accompanied
by audible alarm, and the compressor will stop working automatically. At this point, we
need to discharge the water. Discharging steps are follows:
1 Unplug the power cord and remove the
exhaust pipe assembly.
2 Remove the conditioner to a appripriate place.
3 Disconnect the plug in drainage outfall to
exhaust the water inside the machine.
4 Re-plug the water plug well.
5 Reinstall the exhaust pipe assembly and start
the machine.
Cleaning the Surface
• To avoid electrical shock, turn off the conditioner and pull it plug out before
conducting maintenance and repair.
• Wipe with a soft cloth. Do not use chemicals, such as benzene, alcohol, gasoline,
etc. otherwise, its surface or even the machine will be damaged.
• Do not let water splash into the conditioner inside.