Publicidad
Idiomas disponibles
Idiomas disponibles
4.
Features
weatherproof
with B/W night vision (IR LEDs)
1080P video signal
vandal-proof housing
5.
Overview
Refer to the illustrations on page 2 of this manual.
1
sunshield
2
lens
6.
Hardware installation
Refer to the illustrations on page 2 of this manual.
Choose a location for the camera, keeping following guidelines in mind:
do not install the camera in locations where extremely high or low
o
temperatures or excessive vibrations may occur.
avoid mounting the camera near high electro-magnetic fields.
o
do not aim the camera at the sun or other extremely bright objects
o
or reflections (e.g. metal doors).
Use the mounting bracket to determine the location of the mounting
holes. Drill the holes and secure the bracket using screws.
Connect the two wires for an analogue PAL signal; leave them
unconnected for a HD 1080P TVI signal.
Connect the power connector to the 12 VDC power supply (not incl.).
Connect the BNC connector to a monitor (not incl.).
Point the camera towards the field of interest and tighten the position bolt.
7.
OSD Settings
There is a small joystick in the camera cable that allows you to adjust the
settings of the camera using an on-screen display (OSD).
In the OSD menu:
NEXT/BACK: select this option and press the middle button to go to the
next/previous page of options in the menu.
V. 01 – 27/02/2017
CAMTVI14W
Press the middle button to access the menu, or
to select an option.
Press the up and down buttons to move up and
down in the menu.
Press the left and right buttons to modify the
menu parameters.
4
4
light sensor
5
bracket
©Velleman nv
Publicidad
