Outside Station And Camera Settings (If Any Are Installed) - Extel Lesli Instrucciones De Uso

a. Outside station and camera settings (if any are installed)
1. Pairing: press the
the outside station call button and then the electronic control box paring button (8 fi g. 4). The system validates the
pairing by displaying "PAIRED" or "PAIRING FAILED".
2. Brightness: set the image brightness using the cursor located under the
Brightness: set the image brightness using the cursor located under the
3. Volume: set the ring tone volume using the cursor located under the
Go back to the previous menu by pressing
If you have installed a CCTV camera: If you have installed a CCTV camera:
1. Pairing: press
button on the camera power supply cable (fi g CAM LESLI).. The system validates the pairing by displaying "PAIRED"
or "PAIRING FAILED".
2. Brightness: set the image brightness using the cursor located under the
3. Activation: activate by switching ON or deactivate by switching OFF under the icon
GB7
symbol to pair the element of your choice. You have 30 seconds to confi rm by pressing
to pair the element of your choice. You have 30 seconds to confi rm by pressing the pairing
CFI EXTEL LESLI - 04/2017
icon.
icon.
icon.