Assembling The Equipment - Movement LXR G4 Manual De Instrucciones

ASSEMBLING THE EQUIPMENT

CAREFUL!
Before starting to assemble the bicycle it is necessary to be alert to the
following:
•Check that the packaging is not damaged and the parts and components of
the equipments are not broken in any way.
•It is recommended that the bicycle is taken out from its packing in the area
where it is to be assembled.
•The assembly area should be clean.
•The floor ought to be flat and a leveled to avoid destabilizing the bicycle.
•The space around the bicycle should be kept free from anything as described
in this Manual (see Chapter on Operational Instruction)
•It is recommended that the bicycle is assembled far from any place that is
damp and away from sunlight in order to avoid damage to the equipments
electrical components.
In order to assemble the equipment the following tools are needed:
Allen n°4
Allen n°10
Thread Lock
Medium torque
50%
Do not
completely
tighten the
screws
TORQUE SPECIFICATION OF SCREW
TIGHTENING TABLE
Diameter [mm]
18
/
ICONS
100%
Do the
final
tightening
of the bolts
torque [n.m]