Axis Ip Utility - Single Camera/ Small Installation; Automatic Discovery - Axis P33 Serie Guia De Instalacion

Page 10

AXIS IP Utility - single camera/ small installation

AXIS IP Utility automatically discovers and displays Axis devices on your network. You can also
manually set a static IP address through this application. AXIS IP Utility is available on the Axis
Network Video Product CD, or it can be downloaded from www.axis.com/techsup
Note that you must install the network camera on the same network segment (physical subnet) as
the computer running AXIS IP Utility.

Automatic discovery

1. Check that the network camera is connected to the network and that power has been applied.
2. Start AXIS IP Utility.
3. When AXIS P3343/AXIS P3344/AXIS P3346 appears in the window, double-click to open the
camera's home page.
4. See page 12 for instructions on how to set the password.
Set the IP address manually (optional)
1. Acquire an unused IP address on the same network segment your computer is connected to.
2. Select the network camera in the list.
3. Click the button
and IP address for the network camera. The serial number is located on the product label.
4. Click the Assign button and follow on-screen instructions. Note that the camera must be
restarted within two minutes for the new IP address to be set.
5. Click the Home Page button to access the camera's web pages.
6. See page 12 for instructions on how to set the password.
AXIS P33 Network Camera Series Installation Guide
Assign new IP address to selected device - and enter the serial number