Hitachi CR 13VB Manual De Instrucciones página 15

Fig. 24
Fig. 25
(2) Raise the handle slowly and cut in
with the saw blade little by little. (Fig.
26, Fig. 27)
Fig. 26
Fig. 27
(3) Hold the body firmly until the saw
blade completely cuts into the
material. (Fig. 28, Fig. 29)
Fig. 28
Fig. 29
CAUTION:
Avoid plunge cutting for metallic
materials. This can easily damage
the blade.
Never pull the switch trigger while
the tip of the saw blade tip is
pressed against the material. If you
do so, the blade can easily be
damaged when it collides with the
material.
Make absolutely sure that you cut
slowly while holding the body
firmly. If you
unreasonable force to the saw blade
during the cutting operation, the
blade can easily be damaged.
English
apply any
15