Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Quick Installation
1U Rackmount Installation
The NG24 is shown in the installation diagram. The NG16 can also be rack mounted.
1
Attach the mounting brackets to each side of the switch with the included screws. Be
sure the mounting bracket "ears" are facing forward.
1
2
Mount the switch with user-supplied rackmount hardware.
Note: The user must determine the fitness of the rackmount hardware to hold the unit in the rack
before installation.
2
3
Connect the switch to a properly
grounded outlet. The Power LED will
illuminate when the switch turns on.
4
Connect network cables to the network
switch.
16-09-176-9335EA.indb 5
3
4
5
9/15/2016 2:07:12 PM
Publicidad
Tabla de contenido
