Important Safety Instructions; Mounting Bracket - Spectro-UV SPECTROLINE EDGE 13 Manual Del Operador

The EDGE™ 13 Series UV-A LED flood lamps must be used with a properly grounded
outlet. Please read the instructions in this manual carefully before using the unit.
Never use the equipment in any manner not specified in these instructions.
The lamp is completely safe when used as directed (see MOUNTING INSTRUCTIONS
FOR SAFE
Spectroline UV-absorbing protective eye and facewear. See REPLACEMENT PARTS
®
AND ACCESSORIES for model numbers. The available eye and facewear also
improves the contrast between the fluorescent area and the background.
The operator should stand away from the UV beam and not in a direct line of
sight. NOTE: No UV light should be seen on clothing or body parts. UV reflection
on clothing means the operator must move outside of the UV beam.
For maximum personal safety, we recommend using either the Spectroline
80 face shield, UVG-50 goggles or RP-UVS-30 spectacles.
NOTE: Be sure to use genuine EDGE™ 13 replacement parts. Using another
manufacturer's replacement parts could affect product performance and will void
the lamp warranty.
NOTE: Should the unit's internal temperature become too hot, the unit will
automatically shut down to avoid internal damage or deter use operating outside
of compliance (EDG-13T ONLY). In this event, allow time for the unit to cool.
The unit will power back on when within a safe operating temperature.
MOUNTING INSTRUCTIONS FOR SAFE OPERATION
Secure two eyebolts to the mounting bracket. Attach one metal chain link to each of
the eyebolts (not supplied). You may also affix the unit to any location utilizing the
mounting bracket and bolts. Assure the anchor you are utilizing is secure and can
safely hold the weight of the unit.

IMPORTANT SAFETY INSTRUCTIONS

OPERATION). We recommend
3
using
UVF-
®

Mounting Bracket

Adjustment Bolt