Chapter 1. General Description Technical Characteristics - gala gar GALA MIG 2300 ALU 4R Manual Técnico De Instrucciones

1. GENERAL DESCRIPTION. TECHNICAL CHARACTERISTICS.
This GALA MIG series equipment enable electric welding of carbon steels, weakly alloyed steels, stainless
steels and aluminium, which are the most commonly used metals in modern industry, by means of the MIG-
MAG semiautomatic procedure.
The GALA MIG, in its compact version, is characterised by its wire-feed system integrated with the power
source. This means that the equipment is easy to install and can conveniently be moved to different
workstations
.
General description of the series equipment:
GALA MIG 1810
.
Bodyworkers, coachbuilders, maintenance works, training, etc.
GALA MIG 2300 ALU 4R
professionals boiler and locksmith works. Excellent welding performance. 4 rollers drive wire system.
GALA MIG 2600-4000
professionals boiler and locksmith works. They have a high duty cycle.
Technical characteristics of the GALA MIG (Compact) series equipment.
TECHNICAL CHARACTERISTICS.
Input voltage U (50/60Hz) (1)
1
Maximum input intensity I
Effective input intensity I
1eff
Continuous adjustment margin I
Welding intensity equivalent to 35%.
Maximum welding intensity I
Welding voltage U – U
2min
Number of staggerings U
Drive system
Applicable wire diameters. (mm).
Maximum wire speed.
Voltmeter-Ammeter digital
Thermal insulation.
Ventilation.
Total dimensions (
Spot welding application (SPOT).
Weight.
According to EN 60974 4-1; (1) Other frequency and power supply voltage values on demand.
S – Welding equipment appropriate for welding work in places with limited mobility.
384
532
GALA MIG 1810 – 2300 ALU - 2600
GALA MIG (V. COMPACTA). Manuel d'Instructions
Single-phase power supply equipment.
. Three-phase power supply equipment.
. Three-phase power supply equipment. Designed for use continued in highly
Ref. 53100000
GALA MIG
1810
(1 Ph) – 230 V
25 A
1max
15 A
÷ I 25 ÷150 A
2min 2max
150 A
. 150 A / 35%
2max
. 17.5-35 V
2max
2
2 rollers φ 40mm
0.6-0.8 mm
24 m/min
H (180º C)
FORCED
) mm. 685x532x900
YES
69 Kg
Dimensions of GALA MIG (V. Compacta) equipment.
900
General application in light boiler works:
Ref. 43781000
GALA MIG
2300 ALU 4R
(3 Ph) –
230/400V
18/10 A
14/8 A
20 ÷200 A
260 A
200 A / 60%
16-33 V
7 10
4 rollers φ 30mm
0.6-0.8-1.0 mm
1.2 mm (AL)
19 m/min
Optional KIT Ref. 43981075
H (180º C)
FORCED
685x532x900
YES
79 Kg
384
538
685
556
General application in highly
Ref. 43800000 Ref. 43988000
GALA MIG GALA MIG
2600 4000
(3 Ph) -230/400V (3 Ph) -230/400V
23/13 A 31/18 A
18/10 A 24/14 A
30 ÷230 A 35 ÷300 A
300 A 392 A
230 A / 60 % 300 A / 60 %
17,5-37V 18-39V
10 2x10
2 rollers φ 40mm 4 rollers φ 30mm
0.6-0.8-1.0-1.2
0.6-0.8-1.0 mm
mm
24 m/min 19 m/min
H (180º C) H (180º C)
FORCED FORCED
685x532x900 705x556x900
YES YES
82 Kg 100 Kg
900
GALA MIG 4000
11