Portable Dishwasher - Maytag CDU-1 Guía De Uso Y Cuidado

Portable Dishwashers
Connecting a Portable
1. Turn on the faucet at the sink until the water runs
hot. Turn off the faucet.
2. Pull the connector from the recess in the back of
the dishwasher.
3. Press down on the thumb release and lift the
connector onto the faucet.
4. Remove pressure from the thumb release and tug
slightly on the connector to be sure it is securely in
place.
5. Turn the hot water on full force.
6. Check that the sink drain is open so water from the
dishwasher can drain properly.
7. Pull the electrical cord from the recess. Plug it into
a properly grounded outlet.
8. Select the proper cycle and options for the load and
start the dishwasher.
Care and Cleaning
Clean the cabinet and laminate top with a soft, damp
cloth and liquid spray cleaner.
To polish and protect the laminate top, use a product
specifically developed for countertops such as Hope's
Countertop Polish*.
Apply an appliance wax to the cabinet once a year.
Note
: To protect the laminate top from
damage, do not use it as a cutting surface or
resting place for warm/hot cookware. Do not
slide ceramic or other hard or abrasive objects
across the surface.
* Brand names are the trademarks of the respective
manufacturer.
Disconnecting a Portable
1. Be sure to turn the water supply off and press the
pressure release button before removing the
connector.
2. Press down on the thumb release and remove the
connector from the faucet.
3. Push the connector and hoses back into the
cabinet recess.
4. Unplug the electrical cord and push it back into the
cabinet recess.
9