Troubleshooting; One Year Limited Warranty - Spa Pro 20039B Manual De Usuario

Maintenance and Cleaning
Air Vent
Step 6 - Remove cover, pour
excess water from tank by
tipping unit away from air vent.
Troubleshooting Guide
Symtoms Possible reasons
No mist Power is disconnected or no power
No water in tank
Water above MAX fill line (3.3 oz. / 100mL)
Mist vent in cover is blocked
Ceramic disc is aging (>3,000 hrs use)
Low or weak mist Unit has build up of oil residue
Overfilled or not enough water
Mist vent in cover is blocked
Lquid inside of base
Step 7 - Clean surfaces with soft damp
cloth and wipe dry. Do not use abrasive
cleansers or scouring pads to clean this
appliance.
Solutions
Check power supply connection
Add water to tank
Remove excess water
Clean mist vent or clear blocked item
Contact the manufacturer.
Clean unit and dry thoroughly
Adjust water level accordingly
Clean mist vent or clear blocked item
Clean and allow to dry thoroughly
4

ONE YEAR LIMITED WARRANTY

This appliance is warranted for one year from date of original purchase
against defects in material and workmanship. This warranty does not cover
transportation damage, misuse, accident or similar incident. This warranty gives
you specific legal rights and you may have other rights, which vary from state to
state. This product is intended for household use only, not for commercial use.
Warranty does not cover commercial use.
Your new SPAPRO appliance comes equipped with numerous safety features.
TM
Any attempt to interfere with the operation of these safety features makes this
warranty null and void. In the event we receive an appliance for service that
has been tampered with, we reserve the right to restore it to its original state
and charge for the repair.
For service in warranty - Defective products may be returned, postage prepaid,
with a description of the defect to: The Metal Ware Corporation, 1700 Monroe
Street, Two Rivers, Wisconsin 54241, for no-charge repair or replacement at
our option.
Must include proof of purchase or copy of original bill of sale when returning
product for warranty service.
Please call Customer Satisfaction at 1-800-288-4545 to obtain a Return
Authorization before shipping.
• For service in warranty, follow instructions set forth in warranty. When
ordering new parts, make sure that you always mention the model number
of the product.
• Call us on our toll free number, 1-800-288-4545 and tell us about your problem.
• If we instruct you to send all or part of your appliance to us for repair or
replacement, our Customer Satisfaction representative will provide a Return
Authorization number (this number notifies our receiving department
to expedite your repair). Pack your unit carefully in a sturdy carton with
sufficient padding to prevent damage because any damage caused in
shipping is not covered by the warranty.
• Print your name, address and Return Authorization number on the carton.
• Write a letter explaining the problem. Include the following: your name,
address and telephone number and a copy of the original bill of sale.
• Attach the sealed envelope containing the letter inside the carton. Insure the
package for the value of the SPAPRO
Attn: Factory Service Dept.
The Metal Ware Corporation
1700 Monroe Street
Two Rivers, WI 54241
appliance and ship prepaid to:
TM
5