Giragrill GARDEN 2200 Instrucciones De Montaje, Uso Y Garantía página 10

EN
ASSEMBLAGE INSTRUCTIONS
- To begin the assemblage, separate carriage bolts (small, medium and large) and the capscrews
1
(small and large).
2 -
Assemble the legs uniting both halves with the joint (two small carriage bolts – nut below the leg).
- Fit the front skewer support on the portico and attach it with the bolts (small carriage bolt )
3
- Attach the legs (medium carriage bolts) with the grill in its inverted position.
4
Assemble both of the porticos uniting both halves (small carriage bolt).
-
5
Attach both of the porticos on the barbecue body from its back (medium carriage bolt). Front holes
-
6
are screwed according to the following item.
- Attach the Spinning kit (2 large carriage bolts on the right side and 2 large capscrews on the left
7
side).
-
8 Attach the Superior rear skewer support (small carriage bolt)
-
9
Attach the service table (small capscrew) on the right side of the grill.
-
10
Attach the coal door through the superior part of the grill.
-
11
Fit the auxiliary grill.
-
12 Attach the door for accessories.
-
13
Fit the inferior grating.
-
14
Place the five skewers.
-
15 Before plugging it, check the voltage.
-
Garden2200
It comes with 5 trident skewers ET 510 and an auxiliary grill GA-16
Garden 2200
ASSEMBLAGE SCRIPT
FOLLOW THE NUMERIC SEQUENCE FOR ASSEMBLING
10