Chassis; Fan; Filter; Motors - Vortice DEPURO PRO 150 Manual De Instrucciones

3.2.1. CHASSIS:

Soundproof 30mm extruded aluminum profile, nylon corners and pre lacquered steel sandwich panels, RAL
•
9006, class M0, with 25mm internal rockwool insulation class A1 (non-combustible) and 90Kg/m3 density.
Panels come with quick release fastening system for easy assembly and disassembly whenever required,
whether for cleaning, maintenance o panel repositioning.
Filters are located in the perforated side panels, with handles and fastening system. This ease of access
•
optimizes maintenance and filter replacement procedures. Filter replacement and manipulation of the
DEPURO PRO is recommended with the appropriate PPE's. See the 7. EQUIPMENT MAINTEANACE section
to know how to change the filters and their correct and safe handling.
DEPURO PRO purifiers are equipped with 4 wheels with brakes on the base for ease of mobility throughout
•
the interior spaces. The wheel set is included with the product, but they are not assembled; must be screwed
on the assembly (on extruded aluminum supports) before use.

3.2.2. FAN:

• Equipped with high efficiency single inlet - backward impeller with self-cleaning system, made of
polyamide, statically and dynamically balanced at the factory
3.2.3. FILTERS:
The DEPURO PRO is equipped with a dual filtering stage on each side of it: 4 filters are included: 2 un + 2
un for each purification unit):
2 un x ISO COARSE 65% (old G4) Pre-filter stage to protect from dust and dirt and
improve the shelf life of the main or absolute filter by 65%
2 un x HEPA H14 Main filtering stage of high or absolute efficiency

3.2.4. MOTORS:

-The ref. DEPURO PRO 150 and DEPURO PRO 300 are equipped with a low consumption EC (electronically
commutated) Technology exterior rotor motor. IP-44 protection and class B insulation. Standard voltage 230V
50Hz/60Hz

3.2.5. CONTROL PANEL:

• All DEPURO PRO air purifiers are equipped with a master control panel located on one side of
the structure.
27