Tabla de contenido
Publicidad
Problem
You hear static or buzzing
Reception display on receiver LCD screen
flashes and you hear a low pitched beep
Receiver LCD screen does not turn on
Receiver LCD screen indicates low battery
power
and you hear a high pitched beep
Transmitter power indicator does not light
You can hear conversations or sounds
from other homes
Hint: If, after checking all of these solutions, you believe that your transmitter power cord or AC adaptor
are damaged, please contact Fisher-Price
Problems & Solutions
There may be a physical obstruction or noise level causing
interference. Change the location of reciever or try a
different channel. Range varies depending on surrounding
conditions such as noise levels, physical obstructions
and signal interference.
Transmitter power is off. Turn transmitter power on.
Transmitter and receiver are on different channels.
Change all units to the same channel.
Loose power cord connection and transmitter power is off.
Check transmitter power cord plug-to-outlet connection.
No power to wall outlet and transmitter power is off.
Make sure light switch that controls power flow to wall
outlet is on.
Power is off because circuit breaker for room is off.
Make sure house fuses and circuit breakers are on.
Receiver power is off. Turn receiver power on.
Battery needs to be recharged. Charge the battery for 8
hours. Or, use the AC adaptor as a power source (and
charge the battery at the same time!).
Power is off because circuit breaker for room is off.
Make sure house fuses and circuit breakers are on.
No power to wall outlet and power is off. Make sure light
switch that controls power flow to wall outlet is on.
Battery needs to be recharged. Charge the battery for 8
hours. Or, use the AC adaptor as a power source (and
charge the battery at the same time!).
Transmitter power is off. Turn transmitter power on.
Loose power cord connection and transmitter power is off.
Check transmitter power cord plug-to-outlet connection.
No power to wall outlet and transmitter power is off.
Make sure light switch that controls power flow to wall
outlet is on.
Power is off because circuit breaker for baby's room is off.
Make sure house fuses and circuit breakers are on.
There is signal interference due to other nursery monitors
on same channel or cordless telephone use. Change the
channel on all units.
.
®
13
Solution
Publicidad
Tabla de contenido
