Technical Data; Specified Conditions Of Use; Emergency Procedure - Gude KH 32 E Traducción Del Manual Original

ENGLISH
10

Technical Data

Rotary hammer drill
Art. No
Service connection
Rated input
No-load speed
On-load speed max.
Rate of percussion under load max.
Single impact energy
Drilling capacity max.
Concrete / Steel plate / Wood
Chuck neck diameter
Weight
Noise details
Sound pressure level L
Sound power level L
Measured according to EN 60745; Uncertainty K =
3 dB (A)
Wear ear protectors!
Vibration details
Vibration total values (triaxial vector sum) deter-
mined according to EN 60745:
Hammer-drilling into concrete:
Vibration emission value a
Chiselling: Vibration emission
value a
h, Cheq
Uncertainty K = 1,5 m/s
WARNING: The vibration emission level will vary
because of the ways in which a power tool can be
used and may increase above the level given in this
information sheet.
The vibration emission level may be used to compare
one tool with another.
It may be used for a preliminary assessment of
exposure.
An accurate estimate of the vibratory load
should also take into account the times when the
tool is shut down or when it is running but not
actually in use. This may significantly reduce the
vibratory load over the total working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
control elements and how to use the appliance
properly. Abide by all the safety measures stated in
the service manual. Act responsibly toward third
parties.
The operator is responsible for accidents or risks to
third parties.
230 V ~ 50 Hz
0 - 800 min
0-3900 min
0-4100 min
32 / 13 / 40 mm
96,7 dB(A)
pA
107,7 dB(A)
WA
12,732 m/s
h, HD
14,622 m/s
2
Read and understand the operating
instructions before using the
appliance. Familiarise with the
Persons over 16 years of age can only work on the
appliance. An exception includes youngsters trained
in order to reach knowledge under supervision
KH 32 E
of the trainer during occupational education.
In case of any doubts about connection and operati-
58116
on refer please to our customer center

Specified Conditions Of Use

1600 W
The rotary hammer can be used for hammer drilling,
-1
chiselling in stone and concrete and drilling in wood,
-1
metal as well as plastic.
-1
Do not use this product in any other way as stated for
5 J
normal use. Not observing general regulations in force
and instructions from this manual does not make the
manufacturer liable for damages.
64 mm

Emergency procedure

5,45 kg
Conduct a first-aid procedure adequate to the injury
and summon qualified medical attendance as quickly
as possible. Protect the injured person from further
harm and calm them down. If you seek help, state the
following pieces of information: 1. Accident site, 2.
Accident type, 3. Number of injured persons, 4. Injury
type(s)
Symbols
2
WARNING / Caution!
2
Read the operating instructions to reduce
the risk of injury.
Wear eye protective goggles !
Wear ear protectors!
Wear gloves!
Unplug the machine before any work
on it.
Class II tool.
CE marking
Any damaged or disposed electric or
electronic devices must be delivered to
appropriate collection centres.