Camera Description; Installation; Pairing The Camera And Monitor - Abus TVAC15010B Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

4.2 Camera description

5. Installation

5.1 Pairing the camera and monitor

To connect a camera with the monitor, proceed as follows:
1.
Connect the power supply to the cameras and monitor.
In the TFT monitor's menu "Camera Setup -> Pairing" select the camera you require (1–4) and
2.
confirm your choice with OK. The systems starts a 60 second countdown.
3.
During the 60 seconds, press the PAIRING button on the camera cable until the green LINK LED on
the front of the camera starts to flash.
4.
Once the connection is successful, the LINK LED on the camera lights up continuously.
Warning:
Please note that connection can take up to 60 seconds.
Antenna
Light sensor
Fixed lens
Power LED
LINK LED
IR LED
PIR sensor
Camera mount
Pairing button
Power supply connection
5 V DC/1 A
9
English

Publicidad

Tabla de contenido
loading

Tabla de contenido