Cleaning And Care; Troubleshooting - OK. OCR 160PR Manual Del Usuario

CLEANING AND CARE

• Disconnect the product from the power supply before
cleaning it. Clean the product with a soft, damp cloth and a
mild cleaning agent. Finish by wiping it with a dry cloth. Do
not use alcohol, acetone, benzene, scouring cleansers etc. to
clean the product. Do not use hard brushes or metal objects.
• Warning! Never immerse electrical parts of the product in
water during cleaning or operation. Never hold the product
under running water.
• Warning! When cleaning, never use solvents or abrasive
materials, hard brushes, metallic or sharp objects. Solvents are
harmful to human health and can attack plastic parts, while
abrasive cleaning mechanisms and tools may scratch the
surface(s).

TROUBLESHOOTING

If there are any problems during operation, please refer to the
following table. If problems cannot be solved as indicated under
Solution, please contact your manufacturer.
Problem
Product does
not function
No Sound
No radio
reception
IM_OCR160PR_170810_V04_HR.indb 27
27
Possible causes
• Interrupted power
supply
• Volume is very low
• Poor radio reception
Solution
• Check the power
supply
• Adjust the volume
• Place the product
to another place
and adjust the
antenna again.
EN
10/8/17 2:58 pm