Stiga T8521 Manual De Propietario página 2

1. Read this manual carefully before starting assembly. Read each step completely before beginning each step.
2. Some smaller parts may be shipped inside larger parts. Check inside all parts and cartons before assembling or ordering
parts.
3. To make assembly easier, use the Hardware Identifier on page 3 to identify and sort all fasteners. Check all cartons for kits. All
hardware may not be located in one kit.
4. Do not tighten hardware until instructed to do so. If hardware is tightened too soon, mounting holes may not align and parts
may not easily fit together. Leave locknuts slightly loose until you are instructed to tighten them.
5. Tools required for assembly: Phillips Screwdriver, Two 9/16" Wrenches, Two 7/16" Wrenches (Ratchet and 9/16", 7/16" Sockets are
recommended and can be substituted for wrenches).
6. An electric screwdriver is helpful in assembly. However, please set at low torque and use caution because you could over-tighten screws.
7. Save these instructions and your proof of purchase (receipt) in the event that the manufacturer has to be contacted for
replacement parts.
Please Do Not Return This Product To The Store!
Contact Escalade ® Sports customer service department at:
Phone: 1-866-873-3528
Fax: 1-866-873-3533
E-mail: tabletennis@escaladesports.com
Mailing Address (correspondence only):
Escalade Sports
PO Box 889
Evansville, IN 47706
P R E - A S S E M B L Y T I P S
Toll – Free !
Toll – Free !
2
Please visit our Website at:
www.escaladesports.com
ON-LINE TROUBLE SHOOTING TECHNICAL ASSISTANCE
ON-LINE PARTS REQUESTS FREQUENTLY ASKED QUESTIONS
®
ADDITIONAL ESCALADE SPORTS PRODUCT INFORMATION
2017 Escalade Sports