JVC Everio GZ-R15BE Guia Basica Del Usuario página 14

magnetic field or that emit strong
electromagnetic waves.
Do not store the recording medium in
0
locations with high temperature or
high humidity.
Do not touch the metal parts.
0
When erasing data using the
0
camcorder, the data won't be erased
completely. When handing over your
camcorder and/or SD card, you are
recommended to erase all of the data by
either performing "FORMAT" or
"FACTORY PRESET" operation on this
unit, using commercially available
software, or by physically destroying the
camcorder.
LCD Monitor
To prevent damage to the LCD
0
monitor, DO NOT
push it strongly or apply any shocks.
...
place the camcorder with LCD monitor
...
on the bottom.
To prolong service life
0
avoid rubbing it with coarse cloth.
...
While the LCD monitor screen has more
than 99.99% effective pixels, 0.01% of
the pixels may be bright spots (red,
blue, green) or dark spots. This is not a
malfunction. The spots will not be
recorded.
EN
14
Main Unit
For safety, DO NOT
0
open the camcorder's chassis.
...
disassemble or modify the unit.
...
allow inflammables, water or metallic
...
objects to enter the unit.
disconnect the power supply while the
...
power is on.
place naked flame sources, such as
...
lighted candles, on the apparatus.
leave dust or metal objects adhered to
...
the power plug or an AC wall outlet.
insert any objects in the camcorder.
...
Avoid using the unit
0
in places subject to soot or steam such
...
as near a cooking stove.
in places subject to excessive shock or
...
vibration.
near a television set.
...
near appliances generating strong
...
magnetic or electric fields (speakers,
broadcasting antennas, etc.).
in places subject to extremely high (over
...
40 °C) or extremely low (under -10 °C)
temperatures.
DO NOT leave the unit
0
in places of over 50°C
...
in places where humidity is extremely
...
low (below 35 %) or extremely high
(above 80 %) with the terminal cover
open.
in direct sunlight.
...
in a closed car in summer.
...
near a heater.
...
in high places such as on a TV. Leaving
...
the unit in high places while a cable is
connected may result in a malfunction if
the cable is caught and the unit falls onto
the floor.
To protect the unit, DO NOT
0
drop the unit or strike it against hard
...
objects.
subject it to shock or excessive vibration
...
during transportation.
keep the lens directed at extremely
...
bright objects for long periods.
expose the lens to direct sunlight.
...
swing it excessively when using the
...
hand strap.