Installation - Philips SGP6025BB/27 Manual De Usuario

Installation

EN
Installation
Screen Protector Installation
1. Clean the PSP screen of all smudges and
2. Pull off the adhesive backing on the screen
Car Charger Set-Up & Operation
(DC adapter & USB/PSP retractable cable)
1. Extend the retractable car charger cable by
2. Plug the retractable cables USB connector
3. Plug the retractable cables PSP compatible
4. Finally, plug the DC adapter into your
Note: For USB charging of the PSP internal power
pack, insert the USB end of the retractable cable
directly to an available input on your PC.
4
SGP6025BB-27 MANUAL.indd Sec1:4-Sec1:5 SGP6025BB-27 MANUAL.indd Sec1:4-Sec1:5
fi ngerprints with the micro fi ber cloth
(Included).
protector via the white label w/red lettering
and carefully position and apply.
pulling on both ends.
into the DC adapters USB jack.
plug to the PSP's input jack.
vehicles cigarette lighter.
Installation
Mini USB Retracting Cable
Installation & Operation
1. Connect to Retractable mini USB connector
to the mini USB input on top of the PSP.
2. Connect the normal sized USB connector
end directly to your PC.
3. Follow instructions in PSP instruction
manual for music download.
Note: You can connect the Retracting USB to the
PSP and PC without turning the power off.
Face Mask Installation
1. Align the Face Masks screws with the PSP's
screw slots located on the top of the PSP.
2. Use a coin or screwdriver to gently screw
into the PSP screw slots.
3. Flip the shield down to cover the PSP's
front side.
7/31/06 11:33:35 AM 7/31/06 11:33:35 AM
EN
5