Publicidad
Idiomas disponibles
Idiomas disponibles
4. Overview
1
7
5. Installation: hardware
1. Fasten the round base of the bracket to where you want to install the camera with the supplied three
screws. For details about viewing angle and infrared range, refer to the documentation on the
included CD ROM.
2. Connect the camera with the joint lock connected to the bracket. Next, secure the joint lock.
6. Installation: cable connections
For your camera to work properly, you need to connect the camera cables as follows:
•
Connect the network cable [1] to your network.
•
Connect the Alarm in [2] and the GND [3] cables to a magnetic sensor, PIR sensor or relay.
•
Plug the camera's power cable [7] in the included power adapter and connect it to a power socket.
V. 01 – 22/03/2012
3
2
6
CAMIP13
4
5
1
2
3
4
5
6
7
3
1
Mobile device
2
LAN port
3
Wireless router
4
WAN port
5
Modem
6
Network cable (RJ45)
7
CAMIP13
1
Network cable
2
Alarm in (Yellow)
3
GND (Brown)
4
RESET (Red)
5
GND (Black)
6
Alarm out (Pink)
7
Power cable
©Velleman nv
Publicidad
