Faber INCA SMART Instrucciones De Instalación página 16

8
Ducted Venting Installation
10
Install the 2 Flap 10 included with the
Range Hood as shown.
11
Break the 4 pre-cutting pieces and install
the Ring 11 included with the Range
Hood before connecting to the ductwork.
Install Roof or Wall Cap purchased
separately. Connect the 6" metal duct-
work to the Roof or Wall Cap and then
attach ductwork.
16
CHOOSE YOUR DUCTING METHOD
Non Ducted -
Recirculation Option
Torx Screwdriver
12e
For Non-Ducted Recirculation venting route
the ductwork to a location above the hood
where the discharge is vented back into the
room.
Use the included Recirculation Vent Grill to
cover the opening. Secure the grill with the
2 screws provided in the Install Kit.
Required Activated Charcoal
Filter Accessory - sku #FILTER1
or #FILTER1LL
8