Beper 40.962 Manual De Instrucciones página 8

Wax heater Use instructions
Also make any dangerous parts unserviceable, especially for children who could play whit the ap-
pliance. Let other potential users read these instructions. Keep these instructions.
HOW TO USE THE PRODUCT:
WARNING - Always test temperature of the wax before putting hands into or near it.
1. Place the collar ring on the rim of the wax heater.
2. Remove the plastic lid from the wax heater.
3. Adjust the wax-can holder on the wax-can for easy handling.
4. Turn the temperature control knob and set the dial on "100" until the wax
achieves a liquid consistency. This process lasts approximately 15 minutes.
5. Once liquid, place the dial in middle place.
It is important to test the temperature of the wax by
placing a small quantity on the inside of wrist, adjusting the dial accordingly.
6. When the wax is finished, lift out the can.
7. Turn the warmer off every time you finished to use it by full turning the dial counter clock wise.
CLEANING:
Unplug the unit and clean it using a soft, damp cloth, without detergent.
For a better result, remove the wax when the wax heater is still slightly warm.
TECHNICAL DATA
Power: 100W
Voltage: 220-240V ~ 50Hz
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE),
requires that old household electrical appliances must not be disposed of in the normal
unsorted municipal waste stream. Old appliances must be collected separately in order to
optimize the recovery and recycling of the materials they contain, and reduce the impact on
human health and the environment. The crossed out "wheeled bin" symbol on the product
reminds you of your obligation, that when you dispose of the appliance, it must be separa-
tely collected.
8