HOLL'S HL-ED1020R Manual De Instalación página 4

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Read this manual carefully before using your sauna for the first time.
We recommend you keep it in a safe place for future reference.
Install the sauna on a perfectly flat and hard surface.
The sauna must remain in a dry area. Do not use it near a source of water (bath, damp floor, swimming pool).
Do not use liquid cleaning products. Disconnect the sauna before cleaning and use a wet rag (see Maintenance section).
Protect the sauna's electrical cable to avoid it being crushed or pinched.
Prior to replacing certain components, ensure that they are specified by the manufacturer or that they have the same features
as the original parts. Incorrect replacement can cause a fire, a short circuit or damage to the sauna. We strongly recommend
using a qualified technician.
To avoid the risk of burns or electric shocks, do not use any metal tools.
Do not put animals in the sauna.
Do not leave the sauna switched on without supervision.
Do not leave the sauna switched on for more than 3 hours at a time to avoid premature deterioration of the equipment. After 3
hours continuous usage, switch off the sauna for at least one hour.
We recommend that you do not install a locking system on the sauna door.
Check compliance of your electrical installation prior to connecting your sauna to the power supply.
4
Recommendations

Publicidad

Tabla de contenido
loading

Tabla de contenido