Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
9
11
10
9
PWR
The red LED indicator goes on as soon as the device is correctly connected to the mains power supply.
10
DMX
The green LED indicator flashes as soon as a DMX signal is detected at one of the DMX IN sockets: it goes off when the DMX signal is interrupted.
11
OUT 1 – OUT 6
DMX outputs 1 to 6 with female 3-pin and 5-pin XLR sockets. Always use one connection only to control spotlights – never use both outputs
at the same time (either the 3-pin or the 5-pin socket).
INSTALLATION
The rubber feet on the base allow the Cameo SB6TRDM to be positioned securely in a suitable location on a level surface. For traverse
mounting use a suitable traverse clamp (optionally available), which is attached individually to one of the three M10 threads on the bottom
(A). Ensure everything is firmly attached and secure the device at the securing lug provided (B) using a suitable safety cable.
Important: Overhead mounting requires extensive experience, including a knowledge of how to calculate operating capacity limits and
familiarity with installation materials, as well as the ability to run regular safety checks on all installation materials and spotlights. If you do
not possess these qualifications, do not attempt to carry out an installation yourself: have it done by a professional company.
6
11
11
A
11
11
B
11
Publicidad
Tabla de contenido
