Adjusting Setup Items - Sony MEX-BT4150U Manual De Instrucciones

4
Rotate the control dial to select "1," "2"
or "3," then press it.
5
Press
previous display.
For details on the settings for the subwoofer
phase, position, low pass filter frequency
and the low pass filter slope, see page 33.

Adjusting setup items

1 Press , rotate the control dial
until the desired category appears, then
press it.
2
Rotate the control dial until the desired
item appears, then press it.
3
Rotate the control dial to select the
setting, then press it.*
The setting is complete.
4
Press
previous display.
* For CLOCK-ADJ, TUNER-STP and BTM
settings, step 4 is not necessary.
The following items can be set depending
on the source and setting:
GENERAL:
CLOCK-ADJ (Clock Adjust) (page 6)
TUNER-STP*
CAUT ALM*
Activates the caution alarm: "ON,"
"OFF" (page 7).
BEEP
Activates the beep sound: "ON," "OFF."
AUTO OFF
Shuts off automatically after a desired
time when the unit is turned off: "NO,"
"30S (Seconds)," "30M (Minutes)," "60M
(Minutes)."
32
(BACK) to return to the
(BACK) to return to the
(Tuner Step) (page 6)
1
(Caution Alarm)
1
AUX-A* * (AUX Audio)
1 2
Activates the AUX source display: "ON,"
"OFF" (page 35).
CT (Clock Time)
Activates the CT function: "ON," "OFF"
(page 12).
BTM* (page 11)
3
ZAPPIN*
4
ZAP TIME (Zappin Time)
Selects the playback time for the
ZAPPIN function.
– "Z.TIME-1 (about 6 seconds),"
"Z.TIME-2 (about 15 seconds),"
"Z.TIME-3 (about 30 seconds)."
ZAP BEEP (Zappin Beep)
Applies a beep sound between track
passages: "ON," "OFF."
*1 When the unit is turned off.
*2 Does not appear in App Remote.
*3 When the tuner is selected.
*4 When the CD or USB is selected.
SOUND:
EQ7 PRESET (page 29)
EQ7 SETTING (page 29)
POSITION
SET F/R POS (Set Front/Rear Position)
(page 30)
ADJ POSITION*
(page 31)
SET SW POS* (Set Subwoofer Position)
1
(page 30)
BALANCE
Adjusts the sound balance: "RIGHT-15"
– "CENTER" – "LEFT-15."
FADER
Adjusts the relative level: "FRONT-15" –
"CENTER" – "REAR-15."
DM+* (page 31)
2
(Adjust Position)
1