Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
1
1
3
3
4
4
7
7
9
9
8
8
a
a
- Read the important safeguards and Caution.
- Fill kettle up to the MAX WATER MARK and let the water boil, pour the water, cool the kettle and
repeat for at least 3 times before using.
1. Place the water kettle upright on a dry, sturdy and flat surface.
2. Remove the kettle from the base. Open the lid by pressing the safety lock of lid. Fill the kettle with
fresh water through the spout , make sure that the water level pass the minimum level (0.5 Liter) and
does not exceed the maximum level (1.7 Liter).
Before closing the lid and placing it back to the base, ensure that the kettle has not yet been
switched on ("I" position).
3. Dry the water on the bottom of the body if it is wet, then place the kettle securely back to the
base. Insert the plug into a suitable socket and switch the kettle to the "
indicator will be on.
4. After reaching the boiling point, the kettle will be shut off automatically by the safety cut-out
function.
5. To pour hot water, remove the container from the base, ensure the lid remains closed while pour
out the water.
6. You may also shut the kettle off at any time by pressing the "on/off" switch to the "
After the boiling is finished, allow the kettle to cool down for 15 minutes before refilling cold water.
2
5
2
5
1. Safety Lock for Lid
2. Lid
3. Snap-in Filter
4. Spout
6
6
5. On/Off Switch with Power Indicator
6. Handle
7. Max Water Level 1.7 Liter
8. Min Water Level 0.5 Liter
9. Water Level Window
a. Base
Ⅳ. BEFORE USING
VII.
DISPLAY
VIII.
DESCRIPTION DU CADRAN
HOW TO USE
Ⅴ.
IX.
DISPLAY
X.
DESCRIPTION DU CADRAN
www.grunkel.com
I
" position. The power
0
" position.
11
Publicidad
Tabla de contenido
