Package Contents; Installation Instructions - Macally RFTURBO Guia Del Usuario

GB USER GUIDE
Thank you for purchasing the Macally RFTURBO.
The Macally RFTURBO is a 2.4GHz wireless optical
USB mouse with a 1000 dpi optical sensor, three
soft-click buttons and scroll wheel for a precise and
smooth control. The ergonomic and ambidextrous
design offers maximum comfort to both
left-handed and right-handed users and helps to
increase your productivity. The RFTURBO works
both with Mac and PC and doesn't require any
driver.
About this guide
Before you start using the Macally RFTURBO,
be sure to read this guide in its entirety.
Safety intructions
Please read the following carefully before using this
Macally product. Incorrect use of this product may
result in reduced performance, permanent
damage and void warranty:
1. Do not place this product near a heat source.
2. Operating temperature of 5°C to 50°C. Storage
temperature of -20°C to 60°C.
3. Do not place this product near moisture nor
liquids.
4. Operate and store at humidity of 10% to 85%
(non-condensing)
5. Do not place heavy objects on this product.
6. Do not drop this product.
7. Do not dispose this product in the garbage. Take
it to your local recycling centre.

Package contents

• RFTURBO
• USB receiver
• 2 AAA batteries
• User guide
Hardware basics
Battery
compartment
On/Off
switch
2 AAA USB
batteries receiver
dongle

Installation instructions

The Macally RFTURBO is automatically recognized
by the computer and does not require a driver.
Simply follow the steps below and you are ready to
go!
1. Install 2 "AAA" batteries (included) in the battery
compartment.
2. Turn on the On/Off switch.
3. Remove the USB receiver dongle from its
compartment.
4. Plug the USB receiver dongle into the USB port
of your computer.
5. You are ready to use the RFTURBO mouse.
However, if you wish to configure the mouse
settings to your personal preferences you can do
this in the settings of the operating system:
Mac OS
To configure the tracking speed, scrolling speed,
double click speed and primary mouse button, go to
Mouse in System Preferences. To configure the
mouse button functions, go to Mission Control in
System Preferences.
Windows
To configure the mouse buttons, pointer, pointer
options and wheel,
Hardware/Control Panel.
1
Buttons
1000 dpi
optical sensor
ON
OFF
USB receiver
dongle
compartment
go to Mouse
Scroll
wheel
in