Package Contents - Kichler SHOWSCAPE 28324 Manual De Instalación

PACKAGE CONTENTS

1. Determine desired location for mounting fixture
• At desired location, hammer stake (C) into
ground. To avoid damage to stake, place a
board on top of stake while hammering. If
ground is hard and stake is difficult to install,
make a crosscut in ground using a flat
shovel.
• Clear away area in ground at wireway slot in
top of stake (H). Lay fixture's 12V cable into
wireway slot and fixture body (B) into stake
(C). If assembly does not look straight, adjust
by pushing or pulling on stake only. (See
figure 1A).
• TURN OFF POWER. Connect fixture's 12V
cable to transformer landscape wire run using
supplied wire connector.
NOTE: For relamping use the included bulb
wrench after removing caps from posts.
PART
A
B
C
D
.
B
C
D
DESCRIPTION
Fixture
Fixture Body
Ground Stake
Quick Connect
A
2
1A
B
D
C
RELAMPING
2A
Post
2B
3W MR11
Bulb
Bulb
Wrench
QUANTITY
Cap
Socket
1
1
1
1