Preparation; Assembly Instructions - Portfolio Outdoor LV11017 Manual Del Usuario

PREPARATION

Before beginning assembly of the product, make sure that all parts are present. Compare parts
with package contents list and diagram on previous page. If any part is missing or damaged, do
not attempt to assemble the product. Contact customer service for replacement parts.
Estimated Assembly Time: 2 minutes
Tools Required for Assembly: none

ASSEMBLY INSTRUCTIONS

Floodlight assembly
1. Carefully remove the fixture
from its protective packaging. (Fig. 1)
2. Attach the spike (E) to the post (D) by
turning clockwise. (Fig. 1)
3. Unscrew the lens cover (A) by turning
counter-clockwise. (Fig. 1)
4. Insert the bulb (B) into the bulb socket.
Use a soft cloth, as oil from skin may
damage the lamp bulb. (Fig. 1)
5. Replace the lens cover (A) on the
body (C) by turning clockwise. (Fig. 1)
6. Adjust the fixture's angle by loosening
the adjustment screw (F) and
retightening it. (Fig. 1)
NOTE: The lens should point up and
never towards the ground.
C
F
D
E
4
A
B
G
Fig. 1