Publicidad
Idiomas disponibles
Idiomas disponibles
Menus
For installer
Menu
6.2
*
*
Cool
1,
2
To set various water & ambient
temperatures for cooling.
*1 The system is locked to operate without COOL mode. It can be unlocked only by authorised installers or our authorised service partners.
*2 Only displayed when COOL mode is unlocked (This means when COOL mode is available).
20
Default Setting
Setting Options / Display
T for heating ON
Set T for heating
5 °C
ON.
Outdoor temp. for heater ON
Temperature for
0 °C
heater ON
Water temperatures for cooling ON
and T for cooling ON.
Water temp. for cooling ON
Cooling ON
temperatures in
Compensation curve
compensation curve or
direct input.
Water temp. for cooling ON Compensation curve
Input the 4 temperature
X axis: 20 °C, 30 °C
points
Y axis: 15 °C, 10 °C
(2 on horizontal X axis,
2 on vertical Y axis)
• If 2 zone system is selected, the 4 temperature points must also be input for Zone 2.
• "Zone 1" and "Zone 2" will not appear on the display if only 1 zone system.
Water temp. for cooling ON Direct
Set temperature for
10 °C
Cooling ON
T for cooling ON
5 °C
Set T for cooling ON
Publicidad
Capítulos
