Descargar Imprimir esta página

Guinaz F1330 Guia De Instalacion página 2

Publicidad

CARACTERÍSTICAS ELÉCTRICAS.
• Entrada: 90-264V~ 0,6A 47-63Hz
• Salida: 1 - 2 17V ... 3,5A
NORMAS DE USO.
INSTRUCTIONS FOR USE.
ELECTRICAL CHARACTERISTICS.
• Input: 90-264V~ 0,6A 47-63Hz
• Output: 1 - 2 17V ... 3,5A
• This device has an internal fuse that can be reset.
After a short circuit, disconnect the power supply
from the mains for one minute.
• It has two number 1 terminal blocks (positive power
supply) and two number 2 terminal blocks (negative
power supply) to connect the installation cables.
• This power supply is for exclusive use in GUINAZ
entryphone and video entryphone installations. Its
installation will be carried out as specified in this
guide while applying the regulations in force.
• This device has areas inside it with dangerous
voltages. Internal handling will only be performed
by specialised personnel and always with the
equipment disconnected from the mains.
• This device is designed to be installed inside
buildings, it will not be exposed to raindrops or
water splashes.
• Always keep the ventilation slits of this device
clear; under no circumstance will they be
obstructed or covered.
• The installation should have a device being severed
with a minimum separation between contacts
3mm, with a minimum operating voltage of 240V
and rated current between 2A and 10A. This device
should be installed close to the team and in an
easily accessible place.

Publicidad

loading