Philips SBCRU110/38 Instrucciones De Manejo página 4

Instructions for use
MAKE A NOTE OF YOUR CODE!
A
Carefully read the complete procedure before starting!
Note the code inside the battery case and in the codelist of
this booklet. This may be useful if you ever need to set up the
SBC RU110 again. You used the auto search procedure or you
forgot to note the code after set up? No problem! You can still
'read out' the code from the remote:
1
– The green LED lights up.
2
– The green LED goes out.
3
4
5
6
7
8
4
D V I C E
Press and hold keys mute and power simultaneously for
about 3 seconds.
Press the mute key.
Press key P+ and count the number of times the green LED
flashes. This is the first digit of the 5-digit code. (No
flashes means the digit is zero.)
Press key P– and count the number of flashes for the
second digit.
Press key Vol+ and count the number of flashes for the
third digit.
Press key Vol– and count the number of flashes for the
forth digit.
Press mute key and count the number of flashes for the
fifth digit.
Note the code.